Marine Adhesion Solution

Marine Adhesion Solution

Marine Adhesion Solution Tape

Marine application is a tough challenge for adhesion industrial. Since the material must have the ability to against heat, cold, saltwater, string wing and water pressure. It also requires an exquisite processing technology so everything will not go wrong in the sea. Celadon has years of experience about the marine adhesion solution from adhesive transfer tape to material reinforce double coated tape.
We have several practical cases in Florida, USA. All yacht deck EVA foam manufacturers order all kinds of maritime tapes from us. We also offer custom mounting solution tape services in a variety of materials, from cotton paper, fabrics, or plastics.
All of our maritime products are subject to our strict quality control before leaving the factory. Such as adhesion, shear resistance, water resist and seawater durability.
With our experience and quality insurance, we believe we can deliver the most perfect product to customer.

Compatible

• Industry Solution Tape Product Line.

Related Products

• 

  Tissue Double Coated Adhesive Tape

  DS1-ABW49100

  ---

  Description During the lifetime of vehicle, boat or yacht static and dynamic stresses act upon the constructive bond between the object and the subject part. Celadon® Double Coated Tape creates a powerful bond even between materials with different surface characteristics, such as low surface energy, EVA, EPDM form, plastic parts connection. Celadon Tissue Double Coated Adhesive Tape is 0.15mm double coated with solvent base poly-acrylic pressure sensitive adhesive and backing with 110gsm silicon coated release paper liner. Application Techniques The bond strength of Celadon depends on the area of adhesive to surface contact developed during application and substrate type and surface conditions. For maximum bond strength, the surfaces should be thoroughly cleaned with a 50:50 mixture of isopropyl alcohol and water. Ideal tape application is accomplished when the temperature is between 21°C-38°C (70°F-100°F) and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 10°C (50°F) is not recommended. Moderate heat lamination (65°C at 72.5 psi for 1-5 minutes) is recommended on rough surfaces.STORAGE and SHELF LIFE The shelf life of Celadon Adhesive Transfer Tape ATR2165 is 6 months from the date of manufacture when stored in the original packaging materials and stored at 21°C (70°F) and 50% relative humidity.

  ---

---